In this guide we are going to show you how to program the on-board EEPROM chip that is included with the Pi Crust Proto HAT. The ID EEPROM was introduced to the Raspberry Pi HAT specification and tells the Pi...
In this tutorial we’ll be going over how to compile the LoRa Gateway Software our LoRa Gateway HAT. This tutorial is targeted towards the Raspberry Pi, however you can also use this as the basis for other SBCs. We also...
This is a quick guide to show you how to connect a UART GPS module to the LoRa Gateway HAT and how to configure it in the Gateway software. What you will need Raspberry Pi computer LoRa Gateway HAT UART...
This is a quick guide to show you how to assemble the LoRa Gateway HAT to the Raspberry Pi using the provided mounting hardware. What you need LoRa Gateway HAT Raspberry Pi Computer Small Philips screwdriver UART GPS module (optional)...
The PaPiRus HAT is a great way to permanently display text and graphics with its ePaper technology. You can also easily change it’s display or add navigation using its on-board buttons. This is a guide to show you how to...
The Traffic pHAT is a simple LED board that allows users to show the status of all things! It is pre-assembled and ready to go out of the box, just connect it to your Raspberry Pi or Pi Zero and...
The Nebra AnyBeam HAT is a MEMS laser projector that fits right on top of your Raspberry Pi and uses the GPIO pins with some configuration to project a display. It is the first projector of its kind that has...
Our IoT micro:bit LoRa Node allows you to create an inexpensive LoRa node, compatible with The Things Network, in conjunction with a BBC micro:bit or other single board computers. This board allows quicker prototyping as it has the LoRa stack...
