N.B. THIS PRODUCT HAS BEEN DISCONTINUED BY ADAFRUIT – SEE HERE FOR THE ASSEMBLED VERSION
Is this not the cutest little display for the Raspberry Pi?
It features a 2.8″ display with 320×240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top!
Uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24. All other GPIO are unused. Since we had a tiny bit of space, there’s 4 spots for optional slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface.For example, you can use one as a power on/off button. See below for the link to get the optional tact switches, they’re not included.
This version comes as a mini-kit, with a 2×13 extra-tall female header (to connect the plate to the Pi) and a 2×13 male header that can be used to connect an IDC cable or cobbler from the side. The photos above also show the optional installed slim tactile buttons.
The 3mm tactile buttons are not included. Some basic soldering is required to install the headers.
Adafruit have created a custom kernel package based of off Notro’s awesome framebuffer work, so you can install it over your existing Raspbian (or derivative) images in just a few commands. Our tutorial shows you how to install the software, as well as calibrate the touchscreen, show videos, display images such as from your PiCam and more!