Pi PoE Switch HAT Raspberry Pi Kit

The Pi PoE Switch HAT board is completely plug and play. No software is required in order for Pi PoE to provide power and Ethernet directly to your Raspberry Pi. It will work straight out of the box. All you need to do is stack it onto the Raspberry Pi, install the case and micro SD card, and you're good to go!

Raspberry Pi PoE Kit contains

• Raspberry Pi 3 - Model B+
• Pi PoE Switch HAT
• Pi PoE Switch HAT Case
• Optional 16GB NOOBS micro SD Card
• Optional TP-LINK PoE Injector - TL-PoE150S

Quick Start Guide

If you need help using the Raspberry Pi PoE Kit then please follow our nifty quick start guide. We've included information including the board pinout, what the optional resistors are used for, and how to know if adding another board on top will conflict with the Pi PoE HAT.

• Quick Start Guide
• Case Assembly
• FAQ

Technical Specification

• Fully 802.3af (mode A and B) compliant active power over Ethernet
• Includes optional jumper that toggles the power functionality
  • If you keep the jumper on, your Pi PoE will power on after holding the power button for two seconds
  • If you take the jumper off, your Pi PoE will power on as soon as you apply power from your injector
• Contains physical layer power negotiation circuitry, presenting itself as a Class 0 device
• Fully isolated switched mode power supply (SMPS) ? 1500V isolation input to output
• Overload and short circuit protection
• Over temperature protection
• High efficiency (up to 87%) regulated output
• Input voltage 36-56V, output voltage 5V, output current 10-1300mA, max output power 6.5W
• Onboard ATtiny 13A microcontroller for power management functionality
• Configurable on/off switch for intelligent power management
• Leaves all unused GPIO free for use with other add-on boards
• Fully assembled board
• Mounting hardware and short ethernet patch cable included